EAL – Building Regulations for Electrical Installations and Dwellings

1. The aim of the Building Regulations is to

3. What statement is false?

3. The maximum notch depth for a timber floor joist with a depth of 240 mm is

4. Chases in walls should not exceed

5. In a standard house, defined as having a floor area on any storey not exceeding 200 square metres, ceiling mounted alarms must be fixed

6. Which Approved Document of the Building Regulations refers to lighting diffusers that from part of a ceiling?

7. Preventing the ingress of water and gas is a requirement of which building regulations?

8. Acoustic conditions in a dwelling-house are described in which section of Building Regulations Approved Document E?

9. In wet rooms, extractor fans should have an overrun of how long?

10. What are the minimum control requirements for electric panel heaters?

11. One way of complying with Part M in new dwellings is to mount consumer units so that the switches are

12. Approved document P is not applicable for

13. What is notifiable on work?

14. What is non-notifiable work?

15. What is the referenced method for installing cables enclosed in a conduit in a wall?

16. A minimum of 25 mm clearance is required between

17. What is the minimum CSA method  101 for a final ring circuit supplying 13 A socket outlets?

18. What is the minimum degree of protection for equipment installed in a Zone 0 area?

19. FELV circuits are tested at

20. A registered third party certifier must be appointed